ARPIE Kit

This page shows the contents of the ARPIE standard kit. Please note some items may vary in appearance from the photographs below
Note: The control surface PCB has two pre-soldered SMT ICs and two 0805 capacitors on the reverse side
Note: If you have the newer Revision 3 PCB you will have, in addition to the above, another three 1N4001 diodes (total of 4) and an additional 6 way female pin header strip.
Note: The high-brightness blue LEDs in current kits look different to the above (have a blue lens)
Note: Current kit comes with 13 of these switches plus one 90 degree switch

PCB Footprint for battery box is based on TruPower BH-9VP